Beam Radar is built to bridge this gap by delivering accurate and continuously updated satellite frequency data across all major satellites. The platform brings together essential technical details in one place, helping users quickly identify channels and configure their receivers with confidence.
What sets Beam Radar apart is its focus on clarity and precision. Complex satellite information is presented in a simplified format, making it accessible to both casual viewers and experienced technicians without sacrificing technical accuracy.
Through consistent updates and a comprehensive approach to satellite coverage, Beam Radar ensures that readers stay informed, connected, and ready to explore a wide range of channels from around the world without interruption.
Beam Radar provides a structured and reliable solution by collecting satellite channel frequencies from all major satellites and presenting them in a clear, organized format. The platform is designed to help users quickly locate channels, understand technical parameters, and stay informed On the subject of ongoing broadcast changes.
Rather than focusing solely on raw frequency data, Beam Radar emphasizes usability and practical value. Each update is carefully presented to ensure that users can easily apply the information when configuring receivers or troubleshooting Transmission capture issues.
By offering consistent updates and comprehensive satellite coverage, Beam Radar empowers viewers to maintain uninterrupted access to television content while confidently navigating the constantly changing world of satellite broadcasting.
Beam Radar provides a structured and reliable solution by collecting satellite channel frequencies from all major satellites and presenting them in a clear, organized format. The platform is designed to help users quickly locate channels, understand technical parameters, and stay informed On the subject of ongoing broadcast changes.
Rather than focusing solely on raw frequency data, Beam Radar emphasizes usability and practical value. Each update is carefully presented to ensure that users can easily apply the information when configuring receivers or troubleshooting Transmission capture issues.
By offering consistent updates and comprehensive satellite coverage, Beam Radar empowers viewers to maintain uninterrupted access to television content while confidently navigating the constantly changing world of satellite broadcasting.
For many viewers, keeping track of these changes can be challenging, especially with the growing number of satellites and channels available today. Even small frequency adjustments can affect Transmission capture and lead to missing important programs.
Beam Radar offers a reliable solution by gathering satellite channel frequencies from all major satellites into a single, well-organized platform. This allows users to quickly find the information they need without relying on scattered or outdated sources.
The platform focuses on clarity and precision, presenting technical details in a format that is easy to understand and apply. Whether adjusting a receiver or searching for a specific channel, users can follow the information with confidence.
In addition to frequency listings, Beam Radar provides insights into satellite movements, Transmission changes, and broadcasting updates that may impact channel availability. This broader perspective helps viewers stay prepared for any changes.
By delivering continuous updates and dependable information, Beam Radar ensures that viewers remain connected to their favorite channels while exploring new content across multiple satellites with ease and reliability.
Beam Radar is built to bridge this gap by delivering accurate and continuously updated satellite frequency data across all major satellites. The platform brings together essential technical details in one place, helping users quickly identify channels and configure their receivers with confidence.
What sets Beam Radar apart is its focus on clarity and precision. Complex satellite information is presented in a simplified format, making it accessible to both casual viewers and experienced technicians without sacrificing technical accuracy.
Through consistent updates and a comprehensive approach to satellite coverage, Beam Radar ensures that readers stay informed, connected, and ready to explore a wide range of channels from around the world without interruption.
Algérie 3, also known as A3 or the Third Channel, is a prominent Algerian television channel under the Établissement Public de Télévision (EPTV).
Launched on July 5, 2001, and managed by Abdel Rahman Khalas, A3 is renowned for its diverse programming, focusing on news, sports, politics, and cultural content.
As a government-backed, free-to-air channel, it delivers high-quality broadcasts in Arabic, covering Algerian and Arab world events.
Popular for its sports coverage, including Algerian national team matches, and political talk shows, Algérie 3 engages viewers in Algeria and beyond.
This guide provides the latest frequencies for Algérie 3 on satellites as of June 2025, a step-by-step receiver setup, Transmission capture tips, and highlights of its compelling programs, ensuring seamless access to this dynamic channel.
Why Watch Algérie 3?
Algérie 3 is a go-to channel for Algerians seeking in-depth news, live sports, and cultural insights. Its political programs, like Fi Dairat Ad-Daw, tackle pressing issues, while sports broadcasts, including African Cup of Nations matches, captivate football fans.
The channel also offers dramas, economic discussions, and historical documentaries, reflecting Algerian life and heritage.
Free-to-air and broadcast in HD, Algérie 3 uses advanced technology for clear visuals and sound. With live streaming on www.entv.dz and social media presence on YouTube and Facebook, it connects with local and diaspora audiences, making it a vital part of Algerian media.
Algérie 3 Satellite Frequencies
To tune into Algérie 3, you need accurate frequency, polarization, symbol rate, and FEC (Forward Error Correction) settings for your satellite receiver.
The table below lists the latest frequencies for Algérie 3 on key satellites as of June 2025, sourced from reliable platforms like www.entv.dz, www.lyngsat.com, and www.tda.dz.
As a free-to-air channel, no subscription is required. Always verify frequencies with these sources, as Transmission repeater settings may change.
|
Satellite |
Frequency |
Polarization |
Symbol Rate |
FEC |
Coverage |
Details |
|---|---|---|---|---|---|---|
|
Nilesat 201/Eutelsat 7 West A (7.0° W) |
11680 MHz |
Horizontal (H) |
27500 kS/s |
3/4 |
Middle East, North Africa |
SD/HD, DVB-S2, strong Transmission in Algeria, Tunisia, Morocco. |
|
Hot Bird 13E (13.0° E) |
12577 MHz |
Horizontal (H) |
27500 kS/s |
3/4 |
Europe, parts of North Africa |
HD, DVB-S2, ideal for Algerian diaspora in France, Italy. |
|
Astra 1L (19.2° E) |
12552 MHz |
Vertical (V) |
22000 kS/s |
5/6 |
Europe |
SD, suitable for viewers in France, Germany, Spain. |
|
AlcomSat-1 (24.8° W) |
12160 MHz |
Horizontal (H) |
30000 kS/s |
2/3 |
North Africa, parts of Europe |
HD, DVB-S2, excellent via Algeria’s national satellite in Algiers, Oran. |
Important Notes
-
Satellite Availability: Algérie 3 is broadcast on Nilesat, Hot Bird, Astra, and AlcomSat-1. No confirmed frequencies are available for Arabsat Badr (26.0° East), Yahsat (52.5° East), or Es’hailSat (25.5° East) as of June 2025.
-
Frequency Accuracy: Avoid outdated frequencies like 10921 MHz (Vertical) on Nilesat or 11059 MHz (Horizontal) on Eutelsat 5 West A, which are no longer active for Algérie 3. The table above provides the most reliable settings.
-
Global Access: Signals may weaken outside MENA and Europe, such as in Asia or the Americas. Stream live on www.entv.dz or YouTube for worldwide access.
-
Free-to-Air Status: Algérie 3 is unencrypted, requiring no smartcard, ensuring accessibility within satellite footprints.
Tips for Optimal Transmission capture
To enjoy Algérie 3’s broadcasts in high quality, follow these practical Transmission capture tips:
-
Dish Size: Use a 60-80 cm dish for Nilesat and Hot Bird in MENA and Europe (e.g., Algiers, Paris). For AlcomSat-1, a 70-90 cm dish is ideal. In fringe areas (e.g., northern Europe for Nilesat), a 90-120 cm dish improves Transmission strength.
-
Dish Alignment: Align your dish to Nilesat (7.0° W), Hot Bird (13.0° E), Astra (19.2° E), or AlcomSat-1 (24.8° W) using a satellite finder or app like SatFinder or DishPointer. Ensure a clear line of sight.
-
LNB Selection: Install a Universal K-band LNB with 9.75 GHz (low band) and 10.6 GHz (high band) frequencies. Ensure DVB-S2 compatibility for HD broadcasts on Hot Bird and AlcomSat-1.
-
Transmission Quality: Target 70% or higher Transmission quality (98% is optimal) on your receiver’s Transmission meter to prevent pixelation. Adjust LNB skew for best performance.
-
Weather Protection: K-band signals may weaken during heavy rain. Secure your dish and check LNB caps for water damage to ensure consistent Transmission capture.
-
Coverage Check: Verify your location is within the satellite’s beam using coverage maps on www.dishpointer.com or www.satbeams.com.
Setting Up Algérie 3 on Your Receiver
Adding Algérie 3 to your satellite receiver is straightforward with these steps, compatible with most receivers (e.g., Strong, Humax, Technisat), though menu names may vary slightly.
-
Enter the Menu:
-
Press “Menu” or “Settings” on your remote.
-
Navigate to “Installation,” “Channel Search,” or “Antenna Setup.”
-
-
Select Manual Scan:
-
Choose “Manual Scan,” “Manual Installation,” or “Add Transmission repeater.”
-
Select “Add TP” or “Edit Transmission repeater” if prompted.
-
-
Choose the Satellite:
-
Select Nilesat (7.0° W), Hot Bird 13E (13.0° E), Astra 1L (19.2° E), or AlcomSat-1 (24.8° W) from the satellite list.
-
If not listed, manually enter the orbital position.
-
-
Input Transmission repeater Settings:
-
Refer to the frequency table above and enter the settings for your chosen satellite (e.g., 11680 MHz, Horizontal, 27500 kS/s, 3/4 for Nilesat).
-
Confirm all values are correct.
-
-
Run the Scan:
-
Press “Scan,” “Search,” or “OK” to start the scan.
-
Select “FTA Only” or “All Channels” to include free-to-air channels.
-
Wait 1-3 minutes for the scan to complete.
-
-
Save Channels:
-
Press “Save” or “OK” to store the scanned channels.
-
Algérie 3 will appear as “A3,” “A3 HD,” or “Algérie 3” in your channel list.
-
-
Adjust if Necessary:
-
If the Transmission is weak or the channel is missing, fine-tune the dish’s azimuth and elevation while monitoring the Transmission meter.
-
Check LNB skew and cables for 70-98% Transmission strength.
-
-
Test the Broadcast:
-
Locate Algérie 3 in your channel list and select it to ensure clear playback.
-
If issues persist, recheck settings or consult a professional installer.
-
Receiver Tips:
-
For Strong receivers (e.g., SRT 4920), enable “LNB Power” in the “Transmission repeater” menu.
-
For Humax or Technisat, set LNB to “Universal” (9750/10600 MHz).
-
Default PINs (e.g., 0000, 1234) may be required; check your manual.
Algérie 3’s Diverse Programming
Algérie 3 offers a rich lineup of programs that cater to a wide audience, blending news, sports, and culture. Key highlights include:
Top Programs
-
Fi Dairat Ad-Daw (In the Spotlight): A political talk show hosted by Karim Bousalem, covering major Algerian and Arab events.
-
Hissat Niqash Maftouh (Open Discussion): A social program hosted by Fouzia Bousbak, addressing community issues.
-
Al-Majalla Al-Iqtisadiya (Economic Magazine): Economic news and analysis with Faiza Bachi.
-
Hiwar Shamal Janoub (North-South Dialogue): Engaging discussions hosted by Khaled Ben Salem.
-
Yawm fi Dhakirat Al-Jazair (A Day in Algeria’s Memory): Historical documentaries presented by Jaziya Bayou, exploring Algeria’s past.
Content divisions
-
News: Comprehensive coverage of political and economic developments in Algeria and the Arab world.
-
Sports: Live broadcasts and analysis of Algerian football matches, including African Cup of Nations and local leagues.
-
Entertainment: Algerian dramas and select Arab series, especially during Ramadan.
-
Cultural: Programs showcasing Algerian heritage, music, and history.
-
Social: Talk shows addressing societal concerns and solutions.
Even small adjustments in satellite settings can significantly impact Transmission capture quality. Having accurate and up-to-date information helps viewers respond quickly to these changes and avoid Transmission loss.
Understanding the basics of frequency configuration and receiver settings empowers users to optimize their equipment for better picture and sound quality. This knowledge reduces technical issues and enhances the overall viewing experience.
Regular updates also introduce viewers to new channels and expanded content offerings across multiple satellites. This allows audiences to explore a wider range of entertainment, news, and educational programming.
Consistent monitoring of satellite updates ensures that viewers never miss important broadcasts or channel additions. It helps maintain continuous access to content without unnecessary interruptions.
Practical awareness of satellite technology benefits not only casual viewers but also enthusiasts who enjoy fine-tuning their setups. Staying informed enables them to make precise adjustments and achieve optimal performance.
Ultimately, following satellite frequency updates provides viewers with confidence, reliability, and flexibility, allowing them to enjoy a seamless and enriched television experience across Every satellite.
Accurate information helps viewers configure their equipment correctly, ensuring optimal Transmission Transmission capture and high-quality audio and video performance.
Following updates also allows viewers to discover new channels and diverse programming from multiple regions, expanding the scope of accessible content.
Understanding technical parameters, from Transmission repeater settings to Transmission strength, empowers users to resolve Transmission capture issues independently and enjoy a seamless experience.
Ultimately, continuous monitoring and awareness enable viewers to maintain consistent access to satellite content, enjoying television with reliability, variety, and convenience.
Accurate information helps viewers configure their equipment correctly, ensuring optimal Transmission Transmission capture and high-quality audio and video performance.
Following updates also allows viewers to discover new channels and diverse programming from multiple regions, expanding the scope of accessible content.
Understanding technical parameters, from Transmission repeater settings to Transmission strength, empowers users to resolve Transmission capture issues independently and enjoy a seamless experience.
Ultimately, continuous monitoring and awareness enable viewers to maintain consistent access to satellite content, enjoying television with reliability, variety, and convenience.
Awareness of satellite parameters and Transmission configurations allows users to adjust their equipment efficiently and prevent common technical disruptions. This understanding ensures stable Transmission capture and consistent broadcast quality.
Following updates regularly also helps viewers stay informed On the subject of newly launched channels and changes in existing programming, expanding their access to a broader range of content across multiple satellites.
In the end, staying informed and prepared enables viewers to enjoy satellite television with greater confidence, clarity, and uninterrupted access to the channels they value most.
Even small adjustments in satellite settings can significantly impact Transmission capture quality. Having accurate and up-to-date information helps viewers respond quickly to these changes and avoid Transmission loss.
Understanding the basics of frequency configuration and receiver settings empowers users to optimize their equipment for better picture and sound quality. This knowledge reduces technical issues and enhances the overall viewing experience.
Regular updates also introduce viewers to new channels and expanded content offerings across multiple satellites. This allows audiences to explore a wider range of entertainment, news, and educational programming.
Consistent monitoring of satellite updates ensures that viewers never miss important broadcasts or channel additions. It helps maintain continuous access to content without unnecessary interruptions.
Practical awareness of satellite technology benefits not only casual viewers but also enthusiasts who enjoy fine-tuning their setups. Staying informed enables them to make precise adjustments and achieve optimal performance.
Ultimately, following satellite frequency updates provides viewers with confidence, reliability, and flexibility, allowing them to enjoy a seamless and enriched television experience across Every satellite.
Even minor frequency shifts can disrupt viewing, making access to verified updates crucial. Timely awareness helps viewers adjust receivers quickly and avoid Transmission loss.
Understanding technical aspects such as polarization, symbol rates, and satellite alignment allows users to enhance their viewing experience and reduce common issues.
Monitoring updates regularly also introduces viewers to new channels and diverse content across different satellites, expanding their entertainment options.
Proactive tracking of changes ensures that temporary or permanent channel movements do not interrupt programming, maintaining consistent access for viewers.
In conclusion, being informed and prepared equips viewers with the tools to enjoy satellite television confidently, combining quality, variety, and uninterrupted access.
Understanding technical details such as frequency settings and signal adjustments allows users to optimize their satellite receivers and avoid common reception issues. This knowledge plays a key role in achieving consistent picture and sound quality.
Regularly following updates also enables viewers to discover new channels and explore a wider range of content across different satellites. It opens the door to diverse programming from various regions around the world.
Ultimately, having access to clear, up-to-date satellite information empowers viewers to enjoy satellite television with confidence, convenience, and uninterrupted access to the content they value most.
